Ultrasound Therapy

Portable 1 MHz Ultrasound Therapy Device Physiotherapy Massager

1 MHz therapeutic ultrasound Delivers deep therapeutic heat to support pain management and rehabilitation, the core strength of the portable ultrasound therapy device.: :
Two operating modes Offers continuous and pulsed therapy, with four selectable pulse ratios.: :
Adjustable settings Treatment time can be set from 0 to 30 minutes, with power density up to 3.5 W/cm² in continuous mode.: :
Easy-to-use controls Digital display with spring touch buttons for simple operation.: :
Top Highlights
Frequency
1 MHz
Modes
Continuous and pulsed
Timer
0 to 30 minutes
Power Density
Up to 3.5 W/cm² (continuous)
Buy Now
Guaranteed Safe And Secure Checkout
Visa Mastercard American Express Discover PayPal PayU Razorpay Stripe

The portable ultrasound therapy device is built for pain management and rehabilitation, functioning as a dependable portable ultrasound therapy machine for clinical and home settings alike. It sends therapeutic ultrasound deep into soft tissue to help ease muscle tension, reduce swelling and discomfort, and support recovery, much like any well-regarded ultrasound physiotherapy machine. Continuous and pulsed modes let the user match the treatment to the condition, while an adjustable timer and intensity control give precise control over each session. With a multi-country power cord and a 250 g bottle of ultrasound gel included, it suits physiotherapy clinics, rehabilitation centers, and sports recovery settings.

1 MHz Ultrasound frequency
3.5 W/cm² Maximum power density (continuous)
30 min Maximum treatment time
4 Pulse ratios available

Key features

1 Simple digital interface

Digital display with spring touch buttons keeps operation straightforward, a hallmark of a well-designed portable ultrasound therapy device.

2 Two therapy modes

Choose continuous output or pulsed therapy depending on treatment needs.

3 Adjustable pulse ratio

Pulsed mode runs at 100 Hz with ratios of 1:1, 1:4, 1:7, and 1:10, a feature found on most 1mhz ultrasound machine units.

4 Flexible timer

Set treatment time anywhere from 0 to 30 minutes.

5 Strong output

Power density is adjustable up to 3.5 W/cm² in continuous mode.

6 Muscle pain relief

Helps ease pain and muscle tension, making it useful ultrasound equipment for physiotherapy sessions.

7 Swelling reduction

Supports a decrease in soft tissue inflammation.

8 Tissue recovery

Helps accelerate healing and wound recovery.

9 Cellular and lymphatic support

Aids cell metabolism and protein synthesis, and supports lymphatic drainage and cellulite reduction.

Frequency1 MHz
Ultrasonic Power (Continuous)15 W acoustic
Ultrasonic Power (Pulsed)21 W acoustic
Power DensityUp to 3.5 W/cm² (continuous)
Pulse Frequency100 Hz
Pulse Ratios1:1, 1:4, 1:7, 1:10
Timer0 to 30 minutes
ModesContinuous and pulsed
Power Supply110V / 220V, 50/60 Hz AC
Weight2,000 g (4.40 lbs)
CE certified
ISO 13485 certified
1
Set up the unit: Place it on a stable, dry surface and connect the applicator securely
2
Power on: Connect the power supply and switch the unit on.
3
Set the time: Use the minus and plus buttons to choose the treatment duration.
4
Choose a mode: Press the M button to select continuous or pulsed mode.
5
Apply gel: Spread a suitable ultrasound coupling gel on the treatment area and applicator for proper acoustic contact, as with any portable ultrasound massage machine.
6
Set the intensity: Adjust the control knob according to the professional treatment protocol, following the same principle as any portable ultrasound therapy machine.
7
Position the applicator: Place it in contact with the treatment area.
8
Keep it moving: Move the applicator continuously over the area rather than holding it in one spot, as advised for any ultrasound physiotherapy machine.
9
Monitor the session: Watch throughout, and adjust or stop treatment if unusual discomfort occurs.
10
Finish safely: Reduce the output, remove the applicator, clean it per the manufacturer's instructions, and switch the unit off.
Portable 1 MHz Ultrasound Therapy Device Physiotherapy Massager
  • Ultrasound therapy main unit: 1
  • 1 MHz ultrasonic applicator: 1
  • Multi-country compatible power cord: 1
  • Ultrasound gel: 1 bottle (250 g)
  • Instruction booklet

Where It's Used

Treatment Areas: Deep muscles Tendons Ligaments Plantar fascia Joint and particular tissues Shoulder and hip areas Knee and ankle areas

Settings:

Physiotherapy clinics Sports rehabilitation centers Rehabilitation centers Hospitals and healthcare facilities Orthopedic clinics Sports medicine facilities Home use

Used By:

Physiotherapists Rehabilitation specialists Sports therapists Orthopedic professionals Trained healthcare professionals Adults under professional supervision
Trained operation: Operate only by trained or qualified healthcare personnel, following the manufacturer's instructions, whether for this unit or any other portable ultrasound therapy machine.

Use coupling gel: Always use a suitable ultrasound gel to keep proper contact between the applicator and skin, a routine step for any 1mhz ultrasound machine.

Keep it moving: Do not leave the applicator stationary over one area during treatment.

Avoid excess settings: Do not use excessive intensity or treatment time; choose parameters according to the applicable protocol, the same rule that applies to any ultrasound physiotherapy machine.

Inspect before use: Check the power cable, applicator, and connectors, and do not operate the device if any part is damaged.

Keep dry: Keep the unit away from water and moisture, and never immerse the unit or applicator in liquid.

Clean after use: Clean the applicator following the manufacturer's cleaning instructions, as recommended for any ultrasound equipment for physiotherapy setting.

Storage: Store in a clean, dry place, protected from excess heat, dust, moisture, and impact.

Screen patients: Check for contraindications and precautions before treatment, and do not apply ultrasound over areas where it is contraindicated.

What frequency does the portable ultrasound therapy device use?

1 MHz.

What operating modes are available?

Continuous and pulsed. Pulsed mode runs at 100 Hz with ratios of 1:1, 1:4, 1:7, and 1:10.

How long can a treatment session be set for?

Anywhere from 0 to 30 minutes.

What is the maximum power density?

Up to 3.5 W/cm² in continuous mode

What power supply does it need?

110V or 220V, 50/60 Hz AC, and a multi-country compatible power cord is included.

Is ultrasound gel included?

Yes, one 250 g bottle.

Which body areas can it be used on?

Deep muscles, tendons, ligaments, plantar fascia, joints, shoulder and hip areas, and knee and ankle areas.

Who should operate this device?

Trained or qualified healthcare personnel, or adults under professional supervision.

Why should the applicator keep moving?

Keeping it moving avoids concentrating output on one spot. Do not leave it stationary during treatment.

Is this device certified?

Yes, it is CE and ISO 13485 certified.

Bulk Enquiry