Global Medical Equipment Exporter · UK · EU · Africa · GCC
Global Medical Equipment Exporter · UK · EU · Africa · GCC
1 / 3
ISO 13485:2016 Medical device quality management system
EU MDR Compliant Regulatory documentation per European Medical Device Regulation
Professional Use Only For qualified dental professionals only
Questions about this product?
— our team will reach out.
Dental Consumables · Adhesive Dentistry
7th Gen Self-Etching Dental Bonding Agent
$20.19
All in one application: combines etching, priming, and bonding into a single step, reducing clinical time and minimizing procedural errors.:
Universal adhesion: bonds effectively to both enamel and dentin while remaining compatible with light cured composites and resin cements.:
Ultra thin film layer: creates a uniform adhesive layer without affecting restoration margins or occlusion.:
Reduced post operative sensitivity: seals dentinal tubules to minimize fluid movement and improve patient comfort after restorative procedures.:
Top Highlights
- Brand
- Prime Dental
- Product Name
- Restorite Bond 7G
- Product Type
- 7th generation self etching adhesive
- Volume
- 5 ml
- Curing Mode
- Light cured, 20 seconds
- Quality
- ISO 13485:2016, MDR Compliant
Guaranteed Safe And Secure Checkout
7th Gen Self-Etching Dental Bonding Agent is an advanced 7th generation self etch bonding agent that simplifies restorative procedures by combining etching, priming, and bonding into a single bottle and a single clinical step.Its single bottle formulation eliminates the need for separate etchant and primer components, reducing technique sensitivity and the potential for procedural errors. The methacrylate based formula penetrates dentinal tubules and microscopic irregularities to establish a durable hybrid layer, delivering reliable long term adhesion and excellent marginal sealing.
7th Gen
self etch technology
20 sec
light cure time
5 ml
bottle volume
1 bottle
etch, prime, bond
Key features
1
Single step workflow
Etch, prime, and bond in one application, eliminating separate etching and priming steps from the restorative workflow.
2
Methacrylate based formula
Penetrates dentinal tubules and surface irregularities to form a durable hybrid layer for reliable long term adhesion.
3
Light cured in 20 seconds
Provides excellent operator control during the restorative procedure with fast, predictable polymerization.
4
Precision dispensing nozzle
Delivers consistent drop sizes while minimizing product waste per application.
5
Surface sealant use
Can also be applied as a protective surface sealant during maintenance appointments to extend restoration longevity.
6
Reduced sensitivity
Seals dentinal tubules to minimize post operative fluid movement and improve patient comfort after restoration.
| Brand | Prime Dental |
| Product Name | Restorite Bond 7G |
| Generation | 7th generation self etch adhesive |
| Formula Base | Methacrylate resin |
| Volume | 5 ml per bottle |
| Curing Mode | Light cured |
| Cure Time | 20 seconds with LED or halogen curing light |
| Compatible with | Light cured composites, flowables, nano hybrids, resin cements |
7th Gen Self-Etching Dental Bonding Agent is manufactured under an ISO 13485:2016 certified quality management system and is supported by regulatory documentation in accordance with applicable European Medical Device Regulation requirements.
ISO
13485:2016 Medical device quality management system
EU
MDR Compliant Regulatory documentation per European Medical Device Regulation
Professional
Use Only For qualified dental professionals only
1
Clean and isolate: Clean the prepared tooth and isolate the working area using rubber dam or cotton rolls.
2
Selective etch (optional): For unprepared enamel, optionally apply phosphoric acid for 15 to 20 seconds, rinse thoroughly, and dry.
3
Dispense: Dispense one drop of Restorite Bond 7G into a clean mixing well. Close the bottle immediately after dispensing.
4
Apply actively: Apply to enamel and dentin using a micro brush with an active scrubbing motion for approximately 5 seconds.
5
Air thin: Gently air thin with clean oil free air to evaporate the solvent and create a thin, uniform adhesive film.
6
Light cure: Cure for 20 seconds with a compatible LED or halogen curing light held close to the tooth surface.
7
Place restoration: Proceed immediately with placement and incremental curing of the restorative composite material.
Important: Air thinning is critical: thorough solvent evaporation through air thinning is essential before curing. Inadequate air thinning leaves residual solvent in the adhesive layer, which can compromise bond strength and cause restoration failure.
- 1 × 5 ml Bottle of 7th Gen Self-Etching Dental Bonding Agent
- 1 × Instruction Manual
- Bulk ordering: available as individual bottles or in multi unit quantities. Contact us for bulk pricing and carton configurations.
Clinical applications
Direct composite restorations
Protective surface sealant
Resin cement applications
Core build up procedures
Composite and porcelain repair
Glass ionomer surface sealing
Compatible materials
Light cured composites
Flowable composites
Nano hybrid composites
Resin cements
Feature
Restorite Bond 7G (This Product)
This product
3 Step Total Etch (4th/5th Gen)
Number of steps
Single step: one bottle, one application
Three steps: etch, prime, bond (separate components)
Separate etchant needed
No, etchant is incorporated into the adhesive
Yes, phosphoric acid applied and rinsed separately
Smear layer handling
Modified and incorporated into the hybrid layer
Completely removed by acid etching and rinsing
Technique sensitivity
Lower, fewer steps reduce procedural variables
Higher, over etching or contamination affects bond
Post op sensitivity
Reduced, tubules sealed without over etching dentin
Higher risk if dentin is over etched or not dried correctly
Chair time
Shorter, single application step saves time per procedure
Longer, multiple timed steps required
Best for
High volume practices, efficiency focused workflows, routine direct restorations
Cases requiring maximum enamel bond strength or specialist indirect work
For demanding enamel bonding situations, selective enamel etching with a 37% phosphoric acid gel before applying Restorite Bond 7G is recommended to achieve optimal enamel bond strength.
Store away from light
Store in a cool, dry location away from direct sunlight. Light exposure degrades the adhesive resin.
Close immediately after use
Replace the cap immediately after dispensing to prevent solvent evaporation, which reduces the adhesive volume and performance.
Moisture control
Contamination with saliva or blood during application will reduce bond strength. Maintain proper isolation throughout the procedure.
Avoid contact with eyes
Wear appropriate PPE. If adhesive contacts the eye, rinse immediately with copious water and seek medical advice.
Remove excess before curing
Remove pooled adhesive from the gingival margin before light curing to avoid gingival irritation and marginal interference.
Check expiry date
Do not use after the expiry date printed on the bottle. Expired adhesive may exhibit reduced bond strength and solvent content.
Professional use only
For qualified dental professionals only. Use in accordance with the manufacturer’s instructions for use and applicable regulations.
Use immediately after dispensing
Use the dispensed adhesive promptly. Do not return unused adhesive to the bottle as this can contaminate the remaining contents.
Read before use: this page is for product information only and is not clinical guidance. 7th Gen Self-Etching Dental Bonding Agent must be used by qualified dental professionals in line with the manufacturer’s instructions for use and all applicable local regulations.
Questions
Frequently Asked Questions
A 7th generation bonding agent combines the etchant, primer, and bonding resin into one bottle, simplifying adhesive procedures while reducing technique sensitivity.
Restorite Bond 7G is a dedicated self etch bonding agent, designed to eliminate the need for separate dentin etching during routine restorations.
Yes. Selective phosphoric acid etching of unprepared enamel for 15 to 20 seconds before applying the adhesive is recommended for improved enamel bond strength in certain clinical situations.
No. The primer is incorporated into the single bottle formulation, reducing the number of clinical steps.
Yes. It works with all conventional light cured composite materials, flowable composites, nano hybrid composites, and resin cements.
The adhesive should be cured for approximately 20 seconds using an appropriate dental curing light at adequate light intensity.
Air thinning removes excess solvent from the applied adhesive, creating a thin, uniform film that ensures proper polymerization and optimal bond performance. Inadequate air thinning leaves residual solvent that can compromise bond strength.
Yes. Restorite Bond 7G provides excellent dentin bonding for core build up materials before indirect restorations.
Both modern LED and conventional halogen curing lights with adequate light intensity provide effective polymerization within the 20 second cure time.
In all-in-one mode, it is designed to etch, prime, and bond. However, for repairs and new restorations, the instructions recommend etching adjacent enamel for 15-20 seconds to ensure the most robust marginal seal.
Yes, it is a universal adhesive compatible with both enamel and dentin surfaces, as well as existing composite and glass ionomer materials.
Over time, finishing and polishing can leave micro-cracks that lead to wear. Using this 7th Gen Self-Etching Dental Bonding Agent once a year helps reseal these pores and extend the life of the restoration.
Absolutely not. This is a professional-grade material meant for use by licensed dental practitioners only.
No. Prime Dental Restorite Bond 7G is a 7th-generation self-etch adhesive, eliminating the need for separate etching. It simultaneously etches, primes, and bonds in a single step, simplifying the bonding procedure while ensuring strong adhesion to enamel and dentin with reduced chairside time
Restorite Bond 7G is a 7th Generation Self-Etch Composite Bonding Agent. It is distinguished by containing all the ingredients for etching, priming, and adhesive in a single bottle, eliminating the need for a separate etching and priming step.
Restorite Bond 7G is cured by exposure to visible light at the proper intensity. During curing, both the operator and the patient should wear protective eyewear, and the patient's eyes should be shielded from direct exposure to the curing light.
Yes, Restorite Bond 7G is designed for use on both enamel and dentin surfaces, offering versatility in various dental procedures.
7th Gen Self-Etching Dental Bonding Agent
Brand: Prime Dental
Quantity
Prefer a call instead? Request a callback
Dentsply Aquasil Ultra LV Regular Set VPS Impression Material