Questions about this product? — our team will reach out.

Dental Equipment · Curing Lights

Woodpecker O-Light LED Dental Curing Unit

$112.99
Rapid polymerization: 2500 mW/cm² maximum output with Turbo mode curing 2 mm of standard composite in as little as 1 second.:
Simple two-mode interface: Turbo and Normal modes selectable via a straightforward two-button panel, minimizing setup time during clinical procedures.:
Consistent light output: stable intensity throughout the battery cycle ensures predictable and complete polymerization without power fade.:
Over 400 curing cycles: 1400 mAh rechargeable lithium battery delivers more than 400 continuous cycles on a single charge.:
Top Highlights
Brand / Model
Woodpecker O-Light (Standard)
Maximum Intensity
2500 mW/cm²
Turbo Mode
1 sec or 3 sec
Normal Mode
5, 10, 15, or 20 sec
Wavelength
420 to 490 nm
Battery
1400 mAh Rechargeable Lithium
Tip Rotation
360°
Intended Use
Professional Dental Use
Quality
CE Marked, ISO 13485
Buy Now
Guaranteed Safe And Secure Checkout
Visa Mastercard American Express Discover PayPal PayU Razorpay Stripe

The Woodpecker O-Light is a professional wireless LED curing light designed for fast, efficient polymerization of camphorquinone-based composite materials in everyday restorative dentistry. It delivers up to 2500 mW/cm² output through a 420 to 490 nm optimized blue spectrum, with a straightforward two-mode interface that keeps clinical setup time to a minimum. A consistent-output design maintains stable light intensity throughout the battery discharge cycle, and a 360-degree rotating light guide provides comfortable access to posterior restorations and difficult intraoral positions.

2500 mW/cm² max output
1 s Turbo cure time
360° Rotating tip
400+ Curing cycles per charge

Key features

1 2500 mW/cm² Output

Maximum-intensity Turbo mode cures 2 mm of standard composite in 1 second, reducing chair time significantly.

2 Consistent Power

Stable output throughout the full battery cycle ensures complete and predictable polymerization every time.

3 360° Rotating Tip

Full-rotation light guide allows easy access to posterior restorations and patients with limited mouth opening.

4 Thermal Protection

Integrated heat management reduces temperature rise during curing to help protect pulp tissue.

Wavelength 420 to 490 nm
Maximum Light Intensity 2500 mW/cm²
Turbo Timer 1 sec or 3 sec
Normal Timer 5, 10, 15, or 20 sec
Battery Capacity 1400 mAh Lithium Rechargeable
Tip Rotation 360°
Weight 259 g
Dimensions 268.8 x 26.1 x 31.8 mm
1
Fit Sleeve: Place a fresh disposable barrier sleeve over the curing tip before every patient procedure.
2
Attach Eye Shield: Attach the protective orange eye shield to the unit before beginning any curing cycle.
3
Power On and Select Mode: Press the power button to switch on the unit and select Turbo or Normal mode for the procedure.
4
Choose Timer: Select the appropriate curing time for the composite material and increment thickness being placed.
5
Position and Cure: Hold the light guide 1 to 2 mm from the restoration surface and activate the curing cycle.
6
Recharge: Return the unit to its charging base between patients and at the end of each session.
O light Dental Curing Unit
  • 1 x O-Light Main Unit (Wireless)
  • 1 x Protective Orange Eye Shield
  • 1 x Charging Base
  • 1 x Power Adapter
  • 50 x Disposable Barrier Sleeves
  • 1 x Instruction Manual

Clinicians

General Dentists Orthodontists Paediatric Dentists Prosthodontists Restorative Dentists

Settings

General Dental Clinics Restorative Dental Practices Dental Colleges Training Centers

Procedures

Direct Composite Restoration Orthodontic Bracket Bonding Pit and Fissure Sealants Adhesive Cementation Light-Cured Bonding Agents
Eye Protection Required

All staff and the patient must use appropriate orange-tinted protective shields during every curing cycle. Never look directly at the LED beam.

New Sleeve Every Patient

Apply a fresh disposable barrier sleeve to the tip before every patient to maintain barrier infection control.

No Autoclave

Do not autoclave the handpiece or light guide. Disinfect surfaces with approved clinical surface disinfectants only.

Supplied Charger Only

Recharge using only the supplied power adapter and charging base to protect the lithium battery.

Professional use only: This is a prescription-grade professional dental device intended exclusively for use by qualified dental professionals. The high-intensity LED beam may cause eye damage if viewed directly. Always use orange-tinted protective eye shields for the patient and all clinical staff during every curing cycle. Do not autoclave. Follow current infection control guidelines and the manufacturer's instructions for use. Regulatory and compliance documentation for your export destination is available on request before purchase.

Questions

Frequently Asked Questions

The O-Light operates within a 420 to 490 nm wavelength optimized for traditional camphorquinone-based composites, with two modes (Turbo and Normal). The O-Light Plus offers a wider 385 to 515 nm spectrum that also cures modern TPO-based composites, and adds Pulse and Ramp modes. Both share the same battery capacity, weight, and dimensions.
The 1400 mAh rechargeable lithium battery supports more than 400 continuous curing cycles on a full charge.
Yes. The high output intensity effectively polymerizes most compatible camphorquinone-based bulk-fill composites within the manufacturer's recommended curing times. Check that your bulk-fill material does not use a TPO-only photo-initiator, as this model's 420 to 490 nm spectrum is not optimized for TPO systems.
Yes. Both the patient and all clinical staff must use orange-tinted protective eye shields throughout every curing cycle. Never look directly at the high-intensity LED beam.
No. The device should not be autoclaved. Use a fresh disposable barrier sleeve for each patient and clean surfaces with approved clinical disinfectants between procedures.
Yes. Turbo mode at 2500 mW/cm² is highly effective for rapid polymerization of orthodontic bracket adhesives, significantly reducing bonding time per bracket.
Position the light guide approximately 1 to 2 mm from the restoration surface without touching it, to maximize light delivery while preventing composite contamination of the tip.

Related Products

Related products

Bulk Enquiry