CE Marked ISO 13485

Questions about this product? — our team will reach out.

Therapy Equipment · Ultrasonic Therapy

Apex Ultra 1&3 MHz Ultrasound Therapy Machine

$127.55

27 pre-set clinical programmes plus manual mode: the PROG./MODE button cycles through 27 disease-specific treatment protocols and a fully manual mode, supporting standardised pain relief and healing protocols across a wide range of musculoskeletal conditions.

Dual 1 MHz and 3 MHz frequency with LED indicators: both probes connect simultaneously; dedicated 1 MHz and 3 MHz LED indicators on the front panel confirm the active output frequency at a glance.

Backlit LCD display: the blue-backlit LCD shows programme name, timer countdown, intensity level, and mode simultaneously for complete session parameter visibility without navigating sub-menus.

Compact and reliable desktop design: the slim, flat-panel desktop enclosure is designed for physiotherapy treatment tables and multi-bay clinic environments, with probes stored at the sides and output ports at the base.

Top Highlights

Model: Apex Ultra 103
Programmes: 27 pre-set programmes plus manual mode
Frequencies: 1 MHz and 3 MHz (selectable; dedicated output ports)
Display: Backlit LCD (programme, timer, intensity, mode)
Frequency LEDs: 1 MHz and 3 MHz indicator LEDs on front panel
Timer: Built-in countdown timer (auto-set per programme)
Enclosure: Compact slim desktop unit, "Simplifying Healthcare Globally"
Certifications: ISO, CE marked, documentation available

Buy Now

Guaranteed Safe And Secure Checkout

The Apex Ultra 103 is a compact, computerised 1 MHz and 3 MHz ultrasound therapy machine designed for advanced digital pain relief and tissue healing in professional physiotherapy settings. Twenty-seven pre-set disease-specific programmes plus a manual mode allow clinicians to deliver standardised or customised ultrasound protocols at the press of a button, reducing session setup time while maintaining clinical precision. The blue-backlit LCD displays all treatment parameters simultaneously including programme name, countdown timer, intensity, and mode. Dedicated 1 MHz and 3 MHz LED indicators confirm the active probe frequency. Both probes connect simultaneously to output ports at the base of the slim desktop unit, with frequency toggled by the front-panel 1+3MHz button.

27 Pre-set programmes + manual

1 + 3 MHz Dual probe frequencies

LCD Backlit digital display

ISO, CE Marked and documented

Key features

1 27 pre-set clinical programmes

The PROG./MODE button cycles through 27 disease-specific treatment programmes covering acute and chronic pain, soft tissue injuries, tendinopathy, and more, each with pre-configured parameters.

2 Manual programme mode

Beyond the 27 pre-sets, a fully manual mode enables the clinician to independently configure intensity, frequency, timer, and output mode for bespoke treatment protocols.

3 1 MHz and 3 MHz LED indicators

Dedicated LED indicators for each probe frequency on the front panel provide instant visual confirmation of which frequency is active without needing to read the LCD screen.

4 Backlit LCD display

The blue-backlit alphanumeric LCD shows programme name, timer countdown, intensity level, and treatment mode simultaneously for comprehensive session parameter monitoring.

5 Intensity up/down control

Dedicated Timer/Intensity buttons allow incremental intensity adjustment during active treatment without requiring probe lift-off from the patient.

6 Pulse and frequency selector

The PULSE/1+3MHz button toggles the active probe frequency between 1 MHz and 3 MHz and selects the pulsed output mode for non-thermal treatment applications.

7 Built-in countdown timer

The integrated timer auto-populates the prescribed duration when a programme is selected, and counts down on the LCD screen to ensure accurate session length management.

8 Compact slim desktop enclosure

The flat-panel design with probe storage at the sides and output ports at the base keeps the treatment table clear and makes the unit easy to position and move between rooms.

Model	Apex Ultra 103
Device type	Computerised dual-frequency ultrasound therapy unit
Programmes	27 pre-set programmes plus manual mode
Frequencies	1 MHz and 3 MHz (selectable; separate output ports at base)
Frequency indicators	1 MHz LED and 3 MHz LED on front panel
Display	Backlit LCD (programme name, timer, intensity, mode)
Timer	Countdown timer; auto-set by programme or manually adjustable
Output modes	Continuous and pulsed (selectable)
Output ports	1 × 1 MHz socket and 1 × 3 MHz socket (bottom of unit)
Power supply	Mains AC (110V / 220V, 50/60 Hz)
Enclosure	Compact slim flat-panel desktop unit with side probe holders
Intended environment	Professional physiotherapy and rehabilitation clinical settings

Control	Function
LCD display	Shows programme name, timer countdown, intensity level, and treatment mode simultaneously
1 MHz LED indicator	Illuminates when the 1 MHz probe is the active output; confirms correct probe frequency at a glance
3 MHz LED indicator	Illuminates when the 3 MHz probe is the active output
PROG. / MODE button	Cycles through the 27 pre-set clinical programmes and the manual programme mode
TIMER / Intensity up (+) button	Increases timer duration in manual mode and increases output intensity during treatment
Intensity down (-) button	Decreases the output intensity during treatment in incremental steps
PULSE / 1+3MHz button	Toggles the active probe output between 1 MHz and 3 MHz, and selects continuous or pulsed output mode
S/S (Start/Stop) button	Initiates or pauses the treatment session and countdown timer without altering set parameters
1 MHz output socket (base)	Dedicated connection for the 1 MHz treatment probe cable
3 MHz output socket (base)	Dedicated connection for the 3 MHz treatment probe cable

Condition / Area	Application / Protocol
Acute and chronic pain	Pre-set pain programmes select appropriate frequency and mode; 1 MHz for deep, 3 MHz for superficial targets
Acute soft tissue injuries	Pulsed mode pre-sets for ligament, tendon, and muscle injuries to minimise thermal loading
Tendinopathy and tendinitis	1 MHz for deep tendons (Achilles, rotator cuff); 3 MHz for superficial; pulsed acute, continuous chronic
Scar tissue management	3 MHz continuous mode for superficial scar softening and remodelling
Shoulder and rotator cuff conditions	1 MHz for periarticular and capsular tissue; pre-set programme or manual mode per clinician prescription
Knee and hip pathology	1 MHz for joint capsule and periarticular soft tissue; pre-set or manual mode
Plantar fasciitis	1 MHz probe at plantar fascia insertion; acute pulsed or chronic continuous programme
Sports injury rehabilitation	Programme and frequency selected by physiotherapist according to tissue depth and healing stage

The Apex Ultra 1 & 3 MHz Ultrasound Therapy Machine is CE marked, confirming compliance with applicable European medical device directives for safety and electromagnetic compatibility. CE documentation is available on request for regulatory submissions, hospital procurement, and import clearance purposes.

CE Marked

ISO 13485

Connect the probes

plug the 1 MHz probe into the 1 MHz socket and the 3 MHz probe into the 3 MHz socket at the base of the unit.

Power on

connect to the mains supply and switch on.
The LCD will illuminate showing the default or last-used programme.

Select programme

press PROG./MODE to cycle through the 27 pre-set programmes or select Manual mode.
The LCD displays the programme name and pre-configured parameters.

Select probe frequency

press the PULSE/1+3MHz button to select 1 MHz or 3 MHz.
Confirm the correct LED indicator illuminates on the front panel.

Apply coupling gel

apply a generous layer of ultrasound coupling gel to the patient's skin at the treatment site before placing the probe head.

Adjust timer (manual mode)

in manual mode press the TIMER (+) button to set the session duration.
Pre-set programmes load their own default timer.

Set intensity

use the intensity up/down buttons to set the prescribed therapeutic output level as shown on the LCD.

Start treatment

press S/S to begin.
Move the probe slowly and continuously over the treatment area throughout the session.
Do not hold the probe stationary.

End session

the unit alerts or stops when the timer reaches zero.
Reduce intensity to zero, press S/S to stop, remove the probe, and clean the probe head and patient's skin.

Always use under professional guidance. Clinical note: all programme selection, frequency, intensity, and timer settings must be prescribed and supervised by a qualified physiotherapist or licensed healthcare professional. The probe must remain in continuous movement at all times during active output to prevent localised tissue heating and periosteal burns.

1 × Apex Ultra 103 main unit (1 & 3 MHz, 27 Program)
1 × 1 MHz treatment probe with cable
1 × 3 MHz treatment probe with cable
1 × AC mains power cable
1 × user manual with 27-programme reference guide

Clinical settings

Physiotherapy clinics Rehabilitation centres Sports medicine facilities Orthopaedic departments Pain management clinicsHospital therapy departments Occupational therapy units

Suitable for

Physiotherapists Sports physiotherapists Rehabilitation specialists Occupational therapists Osteopaths and chiropractors

B2B distribution

Medical equipment distributors Hospital procurement teams Physiotherapy equipment suppliers Healthcare facility contractors

General Handling

✓ Handle both probe heads with care; mechanical shock or dropping can damage the piezoelectric crystal and affect output accuracy. ✓ Place the unit on a stable, flat, dry surface and route all cables safely to prevent trip hazards during treatment. ✓ Inspect both probe cables, connectors, and base output sockets before each clinical session. ✓ Store probes in the side holders when not in use; never tightly wrap cables around probe handles. ✓ Store the unit in a cool, dry environment away from direct sunlight and moisture when not in use.

Electrical Safety

✓ Connect to a correctly rated and earthed mains supply matching the unit's specification (110V or 220V). ✓ Never operate with a damaged power cable, plug, or probe cable; replace before clinical use. ✓ Switch off and disconnect from mains before connecting or disconnecting probe cables at the base sockets. ✓ Do not use in wet environments or where liquid may contact the unit, LCD panel, buttons, or output ports. ✓ Do not open the unit casing; refer all servicing to a qualified biomedical engineer.

Patient Safety

⚠ Always maintain slow, continuous circular probe movement during active output; a stationary probe causes periosteal burns and tissue damage. ⚠ Confirm adequate coupling gel is applied before starting; reapply if the probe loses skin contact during treatment. ⚠ Verify the correct programme, frequency LED, and intensity are confirmed before pressing S/S to start. ⚠ Stop immediately if the patient reports burning, sharp pain, or unusual heat at the treatment site. ⚠ Do not treat over areas where the patient cannot reliably report sensation; thermal damage may occur without warning.

Cleaning & Maintenance

✓ Wipe both probe heads with a clean, soft cloth to remove coupling gel after each patient use; do not immerse probes in liquid. ✓ Clean the casing and front panel with a cloth lightly dampened with mild disinfectant; do not allow liquid to enter the LCD, buttons, or base output ports. ✓ Inspect probe faces regularly for chips or pitting; a damaged probe face must be replaced before further clinical use. ✓ Schedule periodic output calibration and safety testing by a qualified biomedical engineer per local clinical engineering standards. ✓ Maintain a service log recording calibration dates, probe inspections, faults, and corrective actions taken.

Regulatory notice: this device is for professional clinical use only. It must be operated, maintained, and stored in compliance with local medical device regulations. Output calibration should be verified periodically per local clinical engineering standards. Always follow the user manual instructions and consult your regional regulatory authority for compliance and registration requirements.

Questions

Frequently Asked Questions

The Apex Ultra 103 is the model name for this unit within the Apex Ultra range of computerised ultrasonic therapy devices. The "1 & 3 MHz" designation indicates the dual-frequency probe capability. The "27 Program" description refers to the 27 pre-set clinical treatment programmes built into the device, in addition to a fully manual mode.

The 27 pre-set programmes each store a specific combination of frequency, output mode (continuous or pulsed), intensity, and timer pre-configured for a common clinical indication such as acute pain, tendinopathy, or scar tissue management. Selecting a programme automatically loads these parameters. Manual mode allows the clinician to set each parameter independently for bespoke treatments not covered by the pre-sets.

There are two LED indicators on the front panel, one labelled 1 MHz and one labelled 3 MHz. When a probe frequency is active, its corresponding LED illuminates. Pressing the PULSE/1+3MHz button toggles the active output between the two frequencies, and the illuminated LED updates accordingly, providing instant visual confirmation without needing to read the LCD screen.

The 1 MHz and 3 MHz probe output sockets are located at the base (bottom) of the unit, clearly labelled. Both probes can remain connected simultaneously during a clinical session; the active probe is selected using the PULSE/1+3MHz button on the front panel.

Yes. ISO & CE marking documentation is available on request through SnapShopHub. Contact our export team with your specific regulatory and import requirements and we will provide the necessary paperwork to support customs clearance and local device registration.

Yes. SnapShopHub supplies single units for clinical evaluation and bulk quantities for hospital procurement, distributor orders, and clinic fit-out projects. Contact us for bulk pricing, lead times, and export shipping options to your destination.

Apex Ultra 1&3 MHz Ultrasound Therapy Machine