“Woodpecker Mini Ray Portable Dental X-Ray” has been added to your cart. View cart

Being Foshan Tornado Super Torque Head Wrench(403)

Questions about this product? — our team will reach out.

Dental Equipment

Being Foshan Tornado Super Torque Head Wrench(403)

$68.85

High-speed air-rotor headpiece: Precision-engineered for efficient and rapid dental procedures.

Up to 430,000 rpm: Provides high-speed performance across Standard, Mini, and Super Torque head configurations.

High torque: Delivers stable cutting power for demanding tooth preparation procedures.

Wrench-type chuck: Provides secure bur retention and straightforward bur changes.

Ceramic turbine cartridge: Supports smooth and quieter running.

Single spray cooling: Integrated water spray helps reduce heat during cutting.

Stainless steel body: Durable, lightweight construction with an ergonomic design.

Professional dental use: Intended for use by trained dental professionals

Top Highlights

Brand: Being Foshan
Product Type: Air-Rotor Headpiece
Model: 403
Maximum Speed: Up to 430,000 rpm
Chuck Type: Wrench
Cooling System: Single Spray
Connection: 2-Hole
Turbine: Ceramic

Buy Now

Guaranteed Safe And Secure Checkout

The Being Foshan Tornado Super Torque Head Wrench Type Airotor Headpiece (403) is a high-speed dental air-rotor headpiece designed to provide reliable cutting performance, high torque, and controlled operation during demanding clinical procedures. The headpiece features a ceramic turbine cartridge designed for smooth operation and a wrench-type bur retention system engineered to securely hold compatible burs under increased torque loads. Its stainless steel body provides durability while maintaining a lightweight, comfortable form for extended clinical use. The headpiece incorporates a single spray water cooling system to help reduce heat at the cutting site and features a standard 2-hole connection for compatible dental delivery systems. Depending on the selected head configuration, operating speeds range from 350,000 to 430,000 rpm. The high-speed air-rotor is designed for procedures such as tooth preparation, removal of tooth tissue and restorative materials, polishing, cosmetic dentistry, and modification of prosthetic materials.

Up to 430K Maximum RPM

Wrench Chuck Type

1× Spray Cooling System

2-Hole Connection

Key features

1 High torque

Provides stable cutting power for hard enamel and restorative materials.

2 High-speed performance

Supports operating speeds of up to 430,000 rpm, depending on head type.

3 Lightweight air-rotor

Reduces hand fatigue during extended dental procedures.

4 Wrench-type chuck

Allows secure bur retention and controlled bur changes.

5 Ceramic turbine cartridge

Provides smooth and quieter turbine operation

6 Stainless steel construction

Provides a durable and comfortable headpiece body.

7 Professional application

Intended for trained dental professionals.

Prepare the headpiece: Before use, ensure the handpiece is clean and properly sterilized according to the manufacturer's instructions. Check that it is free from debris and that the chuck operates smoothly.

Connect the headpiece: Attach the headpiece to the dental unit's delivery system using the appropriate 2-hole connection

Select the appropriate attachment: Select a suitable dental bur according to the procedure being performed and the applicable headpiece head configuration

Insert the dental bur: Use the wrench to operate the bur chuck. Insert the compatible bur fully into the chuck and tighten it securely, ensuring proper alignment and retention.

Ready for use: Confirm that the bur is securely seated and that water cooling is available before activating the handpiece.

Monitor and adjust settings: Monitor handpiece performance throughout the procedure and adjust compatible operating parameters, water spray, and other settings as required.

Used For:

Tooth preparation Removal of tooth tissue Removal of decay Removal or adjustment of restorative materials Polishing fillings Cosmetic dental procedures Prosthetic modification High-speed dental cutting procedures Used In: Dental clinics Dental hospitals Restorative dentistry Cosmetic dentistry Orthodontic procedures Professional dental practices

Professional use only

For use by or under the direct supervision of a licensed dental professional trained in high-speed handpiece operation.

Always use water cooling

Ensure active water spray cooling during cutting to help control heat generation.

Verify bur locking

Confirm that the bur is fully seated and securely locked with the wrench before activation.

Maintain correct air pressure

Do not exceed the recommended operating air pressure for the selected head configuration.

Inspect before every use

Check for visible damage, chuck wear, turbine irregularities, or other signs of malfunction.

Do not use damaged burs

Inspect burs before installation and replace damaged or worn burs.

Sterilize between patients

Autoclave sterilize the handpiece after every patient according to the manufacturer's protocol.

What is the maximum speed of the Being Foshan Air-Rotor Headpiece?

The maximum specified speed is up to 430,000 rpm, depending on the head configuration.

What type of chuck does this headpiece use?

It uses a wrench-type chuck for secure bur retention.

What head options are available?

The handpiece is available with Standard, Mini, and Super Torque head configurations.

What is the rotation speed of the Standard Head?

The Standard Head operates at approximately 370,000–420,000 rpm.

What is the rotation speed of the Mini Head?

The Mini Head operates at approximately 370,000–430,000 rpm.

What is the rotation speed of the Super Torque Head?

The Super Torque Head operates at approximately 350,000 rpm.

What type of cooling system does the handpiece have?

It features an integrated single spray water cooling system.

What type of connection does the handpiece use?

It uses a standard 2-hole connection for compatible dental unit delivery systems.

What is the headpiece body made from?

The handpiece features a stainless steel body designed for durability and comfortable handling.

Does the handpiece have a ceramic turbine?

Yes. It features a ceramic turbine cartridge designed for smooth and quieter operation.

What burs are compatible with the Standard Head?

The Standard Head accepts burs specified as Φ1.59–1.6 mm × 21–23 mm.

What burs are compatible with the Mini Head?

The Mini Head is designed for short burs with a Φ1.59–1.60 mm shank diameter.

What burs are compatible with the Super Torque Head?

The Super Torque Head accepts burs specified as Φ1.59–1.6 mm × 21–23 mm.

Who should use this handpiece?

It is intended for professional dental use by or under the direct supervision of appropriately trained dental professionals.

Being Foshan Tornado Super Torque Head Wrench(403)