Hospital Bed, Couch & Table

3-Function Electric ICU Bed

$535
The prices are excluding Shipping and Taxes. Due to Weight and Dimention variation.
Product Design: The 3-Function Electric ICU Bed is designed to support patient positioning and routine care in intensive care units and hospital wards. It features a mild steel frame with an epoxy-coated finish
Three Manual Adjustment Functions: All three bed functions are controlled using a crank handle, allowing healthcare staff to adjust the bed according to patient-care requirements.
Emergency CPR Lever: A manual lever on the backrest allows emergency positioning for CPR, following the manufacturer's instructions.
Patient Safety Features: Four foldable polymer-moulded side rails with angle indicators help support patient safety and positioning.
Smooth Mobility: Four 125 mm noiseless castors support bed movement, with two diagonally positioned castors fitted with brakes
Practical Accessories: The bed includes an IV pole with two hooks, drainage hooks on both sides, and IV pole provisions on all four sides.
Top Highlights
3-Function Adjustment
Three bed functions operated using a manual crank handle
Epoxy-Coated Frame
Mild steel construction with an epoxy-coated finish.
Manual CPR Lever
Emergency backrest release mechanism for CPR positioning
Foldable Side Rails
Four polymer-moulded side rails with angle indicators.
Detachable Head and Foot Boards
Polymer-moulded panels designed for convenient removal.
Noiseless Castors
Four 125 mm castors for smooth movement.
Diagonal Wheel Brakes
Two castors have brakes to help secure the bed.
Corner Buffers
Buffers at all four corners help protect the bed during movement
IV Pole Included
Supplied with an IV pole featuring two hooks.
Drainage Hooks
Hooks provided on both sides for compatible drainage bags.
Load Capacity
Listed capacity of 150–200 kg
Buy Now
Guaranteed Safe And Secure Checkout
Visa Mastercard American Express Discover PayPal PayU Razorpay Stripe

The 3-Function ICU Bed is designed to support patient positioning and routine care in hospitals, intensive care units, and critical care departments. It features an epoxy-coated mild steel frame, detachable polymer-moulded head and foot boards, and four foldable side rails with angle indicators. The bed offers three manually operated adjustment functions controlled by a crank handle, along with a manual CPR lever on the backrest for emergency positioning. Four 125 mm noiseless castors, including two with diagonal brakes, support mobility and stability. Additional features include corner buffers, drainage hooks on both sides, and provision for an IV pole on all four sides. The specified load capacity is 150–200 kg, subject to confirmation with the supplier.

Key features

1 Three-Function Adjustment

Allows manual adjustment of three bed functions using a crank handle.

2 Epoxy-Coated Mild Steel Frame

Provides a sturdy structure with a durable protective finish.

3 Detachable Head and Foot Boards

Features polymer-moulded panels for convenient removal and handling.

4 Foldable Side Rails

Includes four polymer-moulded side rails with angle indicators.

5 Manual CPR Lever

Enables emergency backrest flattening according to the manufacturer's instructions.

6 Noiseless Castors

Four 125 mm castors support smooth bed movement.

7 Diagonal Wheel Brakes

Two castors feature brakes to help secure the bed when stationary.

8 Corner Protection Buffers

Four corner buffers help protect the bed and surrounding surfaces from impact.

9 IV Pole with Two Hooks

Supports the positioning of compatible IV fluid containers.

10 Drainage Hooks

Provided on both sides for attaching compatible drainage bags.

11 Load Capacity

Specified capacity of 150–200 kg

Product Name3-Function Electric ICU Bed
Bed FrameMild steel, epoxy-coated
Overall Dimensions2100 × 1040 mm
Height Range550–760 mm
Mattress Platform Dimensions1980 × 860 mm
Adjustment Functions3
Adjustment MechanismManual crank handle
CPR MechanismManual lever on the backrest
Head and Foot BoardsDetachable polymer-moulded
Side RailsFour polymer-moulded foldable rails with angle indicators
CastorsFour 125 mm noiseless castors
BrakesTwo castors with brakes, positioned diagonally
Corner ProtectionBuffers at all four corners
Drainage HooksProvided on two sides
IV Pole ProvisionFour sides
IV PoleOne pole with two hooks
Load Capacity150–200 kg; confirm exact rating with supplier
CDSCO Certification
ISO 13485:2016
1
Position the Bed: Place the ICU bed in the designated clinical area, leaving sufficient clearance around it for patient care and movement.
2
Secure the Castors: Apply the brakes on the two designated castors before patient transfer or when the bed needs to remain stationary.
3
Operate the Crank Handle: Use the manual crank handle to adjust the three available bed functions according to the manufacturer's instructions.
4
Adjust the Side Rails: Raise and secure the foldable side rails when required, checking the angle indicators and locking mechanism where applicable.
5
Use the CPR Lever: In an emergency, trained clinical staff should operate the manual backrest CPR lever according to the manufacturer's instructions and hospital protocols.
6
Attach the IV Pole: Fit the supplied IV pole into a designated provision and ensure it is securely positioned before use.
7
Position Drainage Bags: Attach compatible drainage bags to the provided hooks, ensuring that the bags are properly supported and tubing is not obstructed.
8
Inspect Before Use: Check the frame, castors, brakes, side rails, crank handle, CPR lever and accessories before positioning a patient.
3-Function Electric ICU Bed
  • ICU Bed Frame: One 3-function ICU bed with an epoxy-coated mild steel frame and mattress platform.
  • Head and Foot Boards: Detachable polymer-moulded panels.
  • Side Rails: Four foldable polymer-moulded side rails with angle indicators.
  • Manual Crank Handle: Mechanism for operating the three bed functions.
  • CPR Lever: Manual backrest lever for emergency positioning.
  • Castors: Four 125 mm noiseless castors, including two with brakes.
  • IV Pole: One IV pole with two hooks.
  • Drainage Hooks and Corner Buffers: Provided as part of the specified bed configuration.

SETTINGS

Hospital ICUs Critical Care Units Hospital Wards Emergency Departments Recovery Rooms

USERS

Doctors Nurses ICU Staff Critical Care Teams Hospital Attendants

APPLICATIONS

Patient Positioning Intensive Patient Care Bedside Care Emergency Patient Access Patient Transfer and Recovery
Follow Manufacturer Instructions

Operate all adjustment mechanisms and the CPR lever according to the supplied user manual.

Confirm Load Capacity

Verify the exact maximum rated load with the supplier before use, and do not exceed it.

Lock the Castors

Apply the brakes before patient transfer and whenever the bed must remain stationary.

Secure the Side Rails

Check that the side rails are correctly raised and secured when required.

Use the CPR Lever Correctly

The emergency release should be operated by trained clinical staff according to established protocols.

Avoid Moving Parts

Keep hands, cables and objects clear of the crank mechanism and moving bed sections.

Check Accessories

Ensure the IV pole and drainage hooks are properly fitted and not overloaded.

Inspect Regularly

Examine the frame, epoxy coating, castors, brakes, side rails and adjustment mechanisms for wear or damage.

Clean Appropriately

Follow the manufacturer's cleaning and disinfection instructions and the healthcare facility's infection-control procedures.

Questions

Frequently Asked Questions

The 3-Function ICU Bed is designed for patient positioning and routine care in hospital wards, intensive care units, and critical care departments.
The bed has three adjustment functions, operated manually using a crank handle.
Although listed as an ICU bed, the supplied specifications describe manual crank-operated adjustments.
Yes, it features a manual CPR lever on the backrest to facilitate emergency backrest flattening.
The frame is made of mild steel with an epoxy-coated finish.
The overall dimensions are approximately 2100 × 1040 mm, with a height range of 550–760 mm. The mattress platform measures 1980 × 860 mm.
Yes, it has four foldable polymer-moulded side rails with angle indicators.
Yes, it features four 125 mm noiseless castors, with two diagonally positioned castors equipped with brakes.
Yes, the specified configuration includes one IV pole with two hooks and provisions for mounting the pole on all four sides of the bed.
The listed load capacity is 150–200 kg.
Yes, the bed features detachable polymer-moulded head and foot boards.
Bulk Enquiry