ISO 13485 certified CE certified FDA compliant
Questions about this product? — our team will reach out.

Dental Consumables

Shofu Hy-Bond Temporary Cement Soft Dental Provisional Crown Cement

$55.20
Non-eugenol formula: A polycarboxylate-based temporary crown cement that is compatible with resin-based permanent cements.
Hy-Agent protection: A patented tannin-fluoride additive seals dentinal tubules to help reduce pulpal irritation.
Easy removal: Gives enough adhesive strength for short-term cementation while coming off easily.
Comfortable for patients: Formulated for minimum odour and taste. Top Highlights
Top Highlights
Brand
Shofu
Cement Type
Non-eugenol polycarboxylate temporary cement
Powder/Liquid Ratio
2.2 g / 1.0 g
Pack
60 g powder + 35 g / 30 ml liquid
Buy Now
Guaranteed Safe And Secure Checkout
Visa Mastercard American Express Discover PayPal PayU Razorpay Stripe

Shofu Hy-Bond Temporary Crown Cement (Soft) is a non-eugenol, polycarboxylate-based cement made for temporary cementation of provisional crowns, fixed restorations, and implant prostheses, functioning as a reliable non eugenol temporary cement across general practice. It can also be used for indirect pulp capping and for temporarily sealing prepared cavities as an intermediate restorative, much like any other temporary tooth cement used chairside. The patented Hy-Agent additive, which contains tannin-fluoride, seals dentinal tubules to help prevent pulpal irritation. It is easy to mix and apply chairside, sets quickly, and cleans up easily once excess material is removed. It is intended for dental professionals.

2.2 g / 1.0 g Powder/liquid ratio
~45 sec Mixing time
~8 min Setting time
Non-eugenol Cement type

Key features

1 Easy removal

Sufficient adhesive strength for short-term cementation, with simple removal, the kind of balance expected from a good temporary luting cement.

2 Simple handling

Easy to mix, manipulate, and apply chairside, making it a convenient temporary dental glue for crowns in busy clinics.

3 Fast setting

Sets quickly, with easy clean-up after excess material removal

4 Minimum odour and taste

Improves patient comfort during use.

5 Hy-Agent protection

Tannin-fluoride additive seals dentinal tubules and reduces pulpal irritation.

6 Non-eugenol base

Eugenol-free and compatible with resin-based permanent cements, rounding out its appeal as a temporary crown cement.

BrandShofu
Product NameHy-Bond Temporary Cement (Soft)
Product TypeNon-eugenol polycarboxylate temporary cement
Set TypeMini set (powder + liquid)
Powder/Liquid Ratio2.2 g / 1.0 g (standard)
Mixing TimeAbout 45 seconds
Setting TimeAbout 8 minutes
Packaging60 g powder + 35 g / 30 ml liquid
StorageRoom temperature, 1°C to 30°C (34°F to 86°F), away from direct sunlight
ISO 13485 certified
CE certified
FDA compliant
1
Dispense: The standard ratio is 2.2 g powder to 1.0 g liquid. Put one level scoop of powder on a mixing pad using the scoop provided, then dispense two drops of liquid separately, following the same preparation as any other non eugenol temporary cement.
2
Mix: Divide the powder into 2 equal portions. Mix the first half into the liquid with a spatula for about 15 to 20 seconds, then add the rest gradually until a smooth paste forms. Finish mixing within about 45 seconds.
3
Use immediately: Apply the mix straight away for cementation, sealing, or lining.
4
Allow to set: Keep the area free from saliva for about 8 minutes, then remove excess hardened material by the conventional method.
5
Remove later: Take off the provisional restoration and any residue, and clean the tooth surface thoroughly before the permanent restoration.
Shofu Hy-Bond Temporary Cement Soft Dental Provisional Crown Cement
  • Powder: 1 x 60 g
  • Liquid: 1 x 35 g / 30 ml

Settings:

Dental clinics and restorative dentistry practices

Used For:

Short-term cementation of provisional crowns Temporary cementation of suitable fixed restorations Temporary cementation of compatible implant-supported prostheses Indirect pulp capping per the manufacturer’s instructions Temporary sealing of prepared cavities between treatment stages Temporary cementation involving deciduous (primary) teeth

Used By:

Dental professionals
Professional use only

For dental professionals.

Allergy contraindication

Do not use on patients or by operators with known allergies to this product or polycarboxylate cement. Stop use and seek medical advice if inflammation or an allergic reaction occurs.

Avoid contact

If it touches intraoral soft tissue or skin, blot with alcohol-moistened cotton and rinse with water. For eye contact, flush thoroughly with water and seek medical advice.

Silica dust precaution

Contains free silica. Use a local dust extractor and a dust mask to avoid harmful inhalation during long-term use.

Storage

Keep at room temperature, 1°C to 30°C, away from direct sunlight, the same guidance that applies to any temporary tooth cement.

Questions

Frequently Asked Questions

Temporary cementation of provisional crowns, fixed restorations, and implant prostheses, plus indirect pulp capping and temporary cavity sealing.
No, it is a non-eugenol polycarboxylate cement and is compatible with resin-based permanent cements.
This patented tannin-fluoride additive seals dentinal tubules to help prevent pulpal irritation.
2.2 g of powder to 1.0 g of liquid.
About 45 seconds in total.
Keep the area free from saliva for about 8 minutes, then remove excess material.
Yes, it is indicated for selected temporary cementation involving deciduous teeth.
Yes, it gives enough adhesive strength for short-term use while remaining easy to remove.
60 g of powder and 35 g / 30 ml of liquid.
Anyone with known allergies to the product or to polycarboxylate cement.
It is listed as ISO 13485 certified, CE certified, FDA compliant, and CDSCO registered.
Dental professionals only.

Related Products

Related products

Bulk Enquiry