Global Medical Equipment Exporter · UK · EU · Africa · GCC
Global Medical Equipment Exporter · UK · EU · Africa · GCC
1 / 4
Questions about this product?
— our team will reach out.
Dental Equipment · Digital Imaging
Woodpecker I Sensor RVG Size 1 Digital Dental X-Ray Sensor
$987.99
Ultra-slim Size 1 design: : 4.4 mm thin profile with rounded corners for improved patient comfort, ideal for pediatric patients and anterior imaging.
IP68 waterproof construction: fully sealed for safe immersion in approved cold-chemical disinfectants, supporting strict clinical infection control.
Instant image acquisition: high-resolution digital images appear within approximately 3 seconds of exposure, eliminating film processing entirely.
AI-Dental software included: automatically identifies permanent and deciduous teeth and assists with image analysis for more efficient clinical review.
Top Highlights
- Brand / Model
- Woodpecker i-Sensor H1 (Size 1)
- Sensor Thickness
- 4.4 mm
- Active Imaging Area
- 20 × 30 mm
- Theoretical Resolution
- 25 lp/mm
- Protection Rating
- IP68
- Cable
- 2.7 m · 80,000 bend cycles tested
- Best For
- Pediatric · Anterior Imaging
- Intended Use
- Professional Dental Diagnostic Imaging (Rx)
- Quality
- CE Marked, ISO 13485
Guaranteed Safe And Secure Checkout
The Woodpecker i-Sensor H1 is a Size 1 professional digital intraoral X-ray sensor designed for practices that routinely perform pediatric imaging, anterior periapical radiography, or work with patients who have smaller oral anatomy. At just 4.4 mm thick with a 20 × 30 mm active imaging area, it is the smaller sibling to the Size 2 i-Sensor H2. Its IP68-rated CNC-fused housing allows safe immersion in approved cold-chemical disinfectants, and the 2.7 m USB cable is tested for over 80,000 bend cycles for long-term reliability. The included AI-Dental software adds automatic tooth identification and intelligent image analysis tools not found on standard RVG sensors.
25
lp/mm theoretical resolution
4.4
mm slim profile
IP68
Waterproof rated
AI
Dental analysis software
Key features
1
4.4 mm Slim Profile
Thinner than many competing sensors, reducing intraoral discomfort particularly for pediatric patients and those with limited mouth opening.
2
IP68 Waterproof
Safe for full immersion in approved cold-chemical disinfectants, enabling thorough sensor disinfection between patients.
3
AI-Dental Software
Automatically identifies permanent and deciduous teeth; assists clinicians with intelligent image analysis tools directly on the captured radiograph.
4
80,000 Bend Cycle Cable
Reinforced 2.7 m USB cable tested for long-term clinical durability in high-volume practice environments.
| Sensor Size | Size 1 (H1) |
| Active Imaging Area | 20 × 30 mm |
| Theoretical Resolution | 25 lp/mm |
| Effective Resolution | Greater than 12 lp/mm |
| Pixel Size | 20 μm |
| Sensor Thickness | 4.4 mm |
| Cable Length | 2.7 m |
| Protection Rating | IP68 |
| Connection | USB Direct |
| Image Display Speed | Approximately 3 seconds |
1
Connect: Connect the sensor to a compatible USB port on the imaging workstation.
2
Launch Software: Open the AI-Dental software or your TWAIN-compatible imaging platform before beginning the exposure.
3
Apply Barrier: Cover the sensor with a fresh disposable barrier sleeve before every patient.
4
Position: Place the sensor parallel to the tooth using a compatible positioning system and confirm the active area is correctly aligned.
5
Expose: Activate the X-ray generator at the appropriate exposure setting for the selected tooth and film speed equivalent.
6
Review: The image appears within approximately 3 seconds. Use the AI-Dental software tools to review, enhance, and annotate as needed.
- 1 x Woodpecker i-Sensor H1 (Size 1) with 2.7 m USB Cable
- 1 x Software Installation Media (AI-Dental)
- 1 x Power Adapter
- 1 x User Manual
Clinicians
General Dentists
Paediatric Dentists
Endodontists
Periodontists
Orthodontists
Settings
General Dental Clinics
Paediatric Dental Practices
Dental Hospitals
Dental Colleges
Procedures
Pediatric Radiography
Anterior Periapical Imaging
Caries Detection
Endodontic Working Length
Periodontal Bone Assessment
Root Canal Obturation Check
Barrier Sleeve Every Patient
Always fit a fresh disposable barrier sleeve before intraoral positioning to maintain barrier infection control.
Cold Disinfect Only
Disinfect using approved cold-chemical disinfectants. The IP68 rating allows safe immersion. Never autoclave.
Protect the Cable
Store the cable loosely coiled and avoid tight bends near the sensor housing to protect internal wiring.
Inspect Regularly
Check the cable and housing regularly for signs of wear, cracking, or physical damage and remove from service if damaged.
Professional diagnostic use only: This is a prescription-grade professional dental diagnostic device intended exclusively for use by qualified dental professionals. Images produced support clinical diagnosis but do not replace a comprehensive clinical examination. Never autoclave. Always apply a fresh disposable barrier sleeve for each patient. Cold-chemical disinfection only. Comply with current infection control guidelines and regulatory requirements for your destination market. Product documentation available on request.
Questions
Frequently Asked Questions
RVG (RadioVisioGraphy) is a digital dental X-ray sensor that captures intraoral radiographs electronically and displays diagnostic images almost instantly, eliminating the need for film and chemical processing.
Size 1 is particularly well suited for pediatric patients, anterior periapical imaging, patients with narrower dental arches, and those with limited mouth opening. For routine adult posterior and bitewing imaging, the Size 2 (H2) provides a larger active imaging area.
The AI-Dental software automatically identifies and labels permanent and deciduous teeth on captured radiographs, and provides intelligent image analysis assistance to support clinical review. It runs on Windows 7 through 11 and integrates with TWAIN-compatible imaging platforms.
The sensor displays captured images in approximately 3 seconds, allowing immediate chairside review without any processing delay.
No. Never autoclave or dry-heat sterilize the sensor. The IP68 rating allows safe immersion in approved cold-chemical disinfectants for disinfection between patients. Always use a fresh disposable barrier sleeve during procedures.
No. The supplied AI-Dental software and TWAIN drivers are designed for Windows operating systems only (Windows 7 through 11). macOS is not supported.
The H1 (Size 1) has a smaller 20 × 30 mm active area and 4.4 mm thickness, making it better suited for pediatric and anterior imaging. The H2 (Size 2) has a larger 26 × 36 mm active area at 4.5 mm thickness, covering adult posterior and bitewing imaging more effectively. Both share the same resolution specifications and IP68 rating.
Woodpecker I Sensor RVG Size 1 Digital Dental X-Ray Sensor
Brand / Model: Woodpecker i-Sensor H1 (Size 1)
Quantity
Prefer a call instead? Request a callback
