ISO 13485:2016 Medical device quality management ISO 9001:2015 Quality management systems CE European conformit
Questions about this product? — our team will reach out.

Surgical Equipment · Electrosurgical Units

300 W Electrosurgical Analog Machine For Bipolar and Monopolar

$435
Versatile operating modes: supports cutting, coagulation, and bipolar procedures for a wide range of surgical applications.
High-frequency precision: radio-frequency energy enables clean tissue cutting and controlled coagulation while minimizing mechanical tissue trauma.
Non-sparking bipolar output: isolated bipolar performance for delicate microsurgical and neurosurgical procedures.
Complete clinical package: supplied with footswitch, patient plate, reusable electrodes, and bipolar forceps for immediate setup.
Top Highlights
Model
SSE-300 Solid-State
Product Category
ESU Machine
Maximum Output
300 W
Operating Modes
Cut, Coagulation, Bipolar
System Type
Analog / Solid-State
Interface
Color-Coded Knobs & Toggle Switch
Power Supply
230 V Single Phase with SMPS
Quality
ISO 13485:2016, ISO 9001:2015, CE, FDA
Buy Now
Guaranteed Safe And Secure Checkout
Visa Mastercard American Express Discover PayPal PayU Razorpay Stripe

Designed for hospitals and surgical centres, the SSE-300 delivers reliable 300 W performance for both monopolar and bipolar electrosurgery. Its analog solid-state design uses high-frequency radio waves for precise tissue cutting and controlled coagulation while minimizing mechanical tissue damage. The isolated bipolar output enhances safety during delicate procedures, and the comprehensive accessory kit enables immediate clinical setup.

300 W Maximum output
3 Operating modes
<1.8 V Neutral to earth limit
7 Accessories included

Key features

1 300 W Output

Sufficient for a broad range of general and specialized surgical procedures.

2 High-Frequency RF Technology

Accurate tissue cutting and controlled coagulation with reduced mechanical trauma.

3 Non-Sparking Bipolar

Isolated output for enhanced precision in microsurgery and neurosurgery.

4 Analog Solid-State

Dependable operation with responsive manual color-coded controls.

5 Monopolar and Bipolar

Toggle between modes from the front-panel switch for procedural flexibility.

6 SMPS Power Supply

Stable electrical performance during continuous surgical use.

Product Name 300 W Electrosurgical Analog Machine for Bipolar and Monopolar
Model SSE-300 Solid-State
Device Type Electrosurgical Unit (ESU)
Technology Analog Solid-State
Maximum Power Output 300 W
Energy Type High Radio-Frequency Current
Operating Modes Cut, Coagulation, Bipolar
Internal Power Supply Switching Mode Power Supply (SMPS)
Input Voltage 230 V Single Phase
Neutral to Earth Voltage Limit Less than 1.8 V
Front Panel Connections Hand Switch, Active Electrode, Patient Plate, Bipolar Output, Foot Switch
Bipolar Output Isolated, Non-Sparking

Manufactured under internationally recognized quality standards, certified to ISO 13485:2016, ISO 9001:2015, CE, and FDA requirements, reflecting established medical device quality management and regulatory compliance.

ISO 13485:2016 Medical device quality management
ISO 9001:2015 Quality management systems
CE European conformit
FDA FDA quality system compliance
1
Initialize: Connect to a 230 V AC power outlet and switch the system on.
2
Connect: Attach the active electrode, footswitch, and patient plate for monopolar procedures.
3
Position Plate: Place the patient plate close to the surgical site, avoiding bony prominences and excessive hair. Use saline to improve conductivity where appropriate.
4
Select Mode: Choose the required operating mode and adjust output on the electrosurgical unit.
5
Operate: Begin with the lowest practical power setting and increase only as clinically required.
6
Complete: Switch off after the procedure and disconnect all accessories safely.
7
Clean: Clean reusable accessories using recommended sterilization procedures before reuse.
Important: This diathermy machine is intended exclusively for trained healthcare professionals in clinical environments.
300w surgical machine
  • 1 x SSE-300 Main Electrosurgical Unit
  • 1 x Bipolar Footswitch
  • 1 x Stainless Steel Patient Plate with Cord
  • 1 x Monopolar Chuck Handle
  • 1 x Set of Reusable Electrodes (Straight, Knife, Needle, Ball)
  • 1 x Bipolar Forceps with Cord
  • 1 x Disposable Monopolar Hand Switch Pencil

Settings

Operating Theatres Surgical Centres Hospitals Day Surgery Units

Surgical Specialties

General Surgery Gynecology Urology Laparoscopy Thoracic Surgery Neurosurgery Microsurgery Plastic & Reconstructive Surgery

Procedures

Tissue Cutting Hemostasis Monopolar Coagulation Bipolar Coagulation
Do not spark test the electrode

Never test by sparking the active electrode against grounded metal.

Do not coil cables

Coiling active or patient cables increases RF leakage current and creates a safety hazard.

Pacemaker patients

Position the return electrode as far from the pacemaker as possible. Avoid needle ECG electrodes.

Do not immerse accessories

Clean reusable accessories with a damp cloth. Sterilize using E.T.O. Never immerse in liquid.

Grounding System

The operating room must have an appropriate copper-wire grounding system. Maintain neutral to earth voltage below 1.8 V.

ECG Electrode Distance

Keep ECG electrodes at least 15 cm from the surgical site to reduce interference and burns.

Ventilation

Maintain adequate ventilation around the unit during operation to prevent overheating.

Start Low

Always start with the lowest practical power setting and increase only as clinically required.

Professional use only: This electrosurgical unit is intended exclusively for use by trained healthcare professionals in appropriately equipped clinical environments. Improper use, incorrect grounding, or failure to follow the operating manual may result in patient or operator injury. Always read and follow the full instructions for use before operating this device. Unusually high power requirements during a procedure often indicate poor patient plate contact or residue on the active electrode; investigate before increasing output.

Questions

Frequently Asked Questions

An electrosurgical unit is a medical device that uses high-frequency electrical energy for tissue cutting, coagulation, and other surgical procedures with controlled precision.
It is suitable for general surgery, gynecology, urology, laparoscopy, thoracic surgery, plastic surgery, neurosurgery, and microsurgery.
The isolated bipolar output is non-sparking, making it particularly suitable for delicate procedures requiring precise energy delivery such as neurosurgery and microsurgery.
Unusually high power requirements often indicate poor patient plate contact or residue buildup on the active electrode, both of which increase electrical resistance. Investigate these causes before increasing output.
Yes, with appropriate precautions. Position the return electrode as far from the pacemaker as possible and avoid needle ECG electrodes.
The operating room should have a clean copper grounding system, with voltage between neutral and earth maintained below 1.8 volts.
Wipe with a damp cloth for routine cleaning and sterilize using E.T.O. whenever possible. Do not immerse accessories in liquids.
No. Cables should remain uncoiled during procedures because coiling can increase RF leakage current and create a potential safety hazard.
Yes. The package includes the main unit, bipolar footswitch, patient plate, monopolar chuck handle, reusable electrode set, bipolar forceps, and disposable hand switch pencil, allowing immediate preparation for clinical use.
Yes. The diathermy machine supports both monopolar and bipolar operation, providing flexibility for a wide variety of surgical applications.

Related Products

Related products

Bulk Enquiry