The Woodpecker O-Light Plus is an LED dental curing light designed for polymerizing light-activated dental materials. This device is used by dental professionals for curing composite resins, bonding agents, and sealants during dental procedures.
Professional Dental Equipment: This device is designed for use by trained dental professionals in clinical settings for dental treatment procedures.
Important: Proper training in dental materials and curing techniques is required for safe and effective use.
FDA Disclaimer: These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
Key Features
- LED curing light for dental materials
- [High-intensity] output for effective polymerization
- Compact, lightweight, ergonomic design
- [Multiple curing modes - if applicable]
- [Cordless operation - if applicable]
- Compatible with standard light-activated dental materials
- Durable construction for clinical use
Intended Use
This device is designed for:
- Curing light-activated dental composite materials
- Polymerizing dental bonding agents
- Curing dental sealants
- Professional dental restorative procedures
- Use by trained dental professionals
Clinical Applications:
- Composite fillings
- Dental bonding
- Orthodontic bracket bonding
- Sealant application
- Veneer cementation
Directions for Use
- Ensure device is fully charged [if cordless]
- Select appropriate curing mode
- Position light guide close to material surface
- Activate for manufacturer-recommended cure time
- Move methodically to cure all areas
- Follow material manufacturer curing guidelines
- Clean light guide after use
Important: Follow proper infection control protocols.
Safety Information
Operator Safety:
- Do not look directly at LED light
- Use protective eyewear when operating
- Ensure proper ventilation during use
- Follow infection control protocols
Device Care:
- Keep light guide clean and unobstructed
- Do not immerse in liquid [unless specified]
- Inspect before each use
- Replace worn light guides
General Safety:
- Professional use only - training required
- Not for home or personal use
- Follow manufacturer instructions
- Keep out of reach of children
Maintenance
- Clean light guide after each use
- Disinfect per infection control protocols
- Check light intensity regularly
- Replace bulb/battery as needed per manufacturer schedule
- Store in protective case
Disclaimer
This is professional dental equipment designed for use by trained dental professionals. Proper training in dental materials, curing techniques, and infection control is required. Not for consumer or home use.
FAQs
1. What is a dental curing light?
Answer: A dental curing light is a device that uses LED light to harden (polymerize) light-activated dental materials such as composite fillings, bonding agents, and sealants.
2. Who can use this device?
Answer: Licensed dentists, dental assistants, and trained dental professionals. Requires proper training in dental procedures and materials. Not for consumer or home use.
3. What materials can this cure?
Answer: Light-activated dental composites, bonding agents, sealants, and other photopolymerizable dental materials. Check material manufacturer specifications for compatibility.
4.Are replacement parts available?
Answer: Yes. Replacement light guides, batteries [if cordless], and other parts available from authorized distributors.
5. How long should I cure materials?
Answer: Curing time depends on material type, shade, thickness, and light intensity. Follow dental material manufacturer recommendations, typically 10-40 seconds.
6. Can patients use this at home?
Answer: No. This is professional dental equipment requiring proper training. Home use could result in incomplete curing, material failure, or injury.
7. How do I know if the light intensity is adequate?
Answer: Use a radiometer to measure light output regularly. Replace bulb or service device if intensity drops below manufacturer specifications or dental material requirements.
8. What if the light stops working?
Answer: Check battery charge [if cordless], inspect connections, verify bulb is functioning. Contact authorized service if issues persist. Do not attempt internal repairs.
9. How do I clean and disinfect the device?
Answer: Wipe exterior with approved disinfectant wipes. Use disposable barriers on light guide or clean/disinfect per manufacturer instructions. Follow infection control protocols.
10. What safety precautions are necessary?
Answer: Never look directly at the LED light. Use protective eyewear. Follow infection control protocols. Ensure proper training before use.
