Dry Heat Glass Bead Sterilizer with Glass Beads – Professional Instrument Processing Unit

This dry heat glass bead sterilizer is a professional instrument processing unit designed for controlled high-temperature handling of small metal instruments. The device uses heated glass beads to maintain stable thermal conditions suitable for standardized instrument workflows in dental, laboratory, and technical environments.

The unit features fast heating, consistent temperature maintenance, and a compact countertop design for professional workspaces. It is intended for use by trained personnel as part of professional instrument handling procedures.

Key Specifications

1. Product Type: Dry Heat Glass Bead Instrument Processing Unit
2. Heating Method: Glass bead dry heat
3. Temperature Control: Digital controller
4. Operating Temperature: Up to approx. 240°C
5. Heating Time: Approx. 60 seconds
6. Preset Programs: 4 modes
7. Power Supply: 220–240V AC, 50 Hz
8. Power Consumption: Approx. 250W
9. Weight: Approx. 1 kg
10. Installation: Countertop unit
11. Intended Users: Trained professionals

Features

1. Compact countertop design
2. Fast warm-up time
3. Stable temperature control
4. No water or steam required
5. Suitable for small metal instruments
6. Designed for professional environments

Directions to Use

1. Place the Glass Bead Sterilizer on a flat, stable surface and plug it into a suitable power source.

1. Switch on the device and allow it to heat for 3–4 minutes until it reaches the optimal operating temperature.

1. Ensure the glass beads are properly filled and evenly distributed inside the sterilization chamber.

1. Insert only clean, dry, metal instruments into the glass beads, ensuring the working end is fully immersed.

1. Keep the instruments inside the beads for 20–30 seconds or as recommended for effective sterilization.

1. Carefully remove the instruments using sterile forceps or gloves.

1. Switch off the device after use and allow it to cool down before storage.

1. Clean the outer surface regularly and replace glass beads when required for consistent performance.

Intended Use

This product is intended for professional instrument processing in controlled environments such as dental laboratories, technical laboratories, and similar professional settings. It is not intended for consumer, household, or personal medical use.

Regulatory & Safety Notice

1. For professional use only
2. Operate according to manufacturer instructions
3. Users are responsible for compliance with local regulations
4. This product does not provide medical advice or health guarantees.

Disclaimer:

Professional use only. This dry heat glass bead sterilizer is intended for trained personnel in dental, laboratory, or professional technical environments. Not for personal, household, or consumer use. Does not diagnose, treat, cure, or prevent any disease. Use only according to manufacturer instructions and applicable regulations.

FAQs

Q1. What is this product used for?

It is used for high-temperature processing of small metal instruments in professional workflows.

Q2. Is this for home or personal use?

No, it is intended only for trained professionals.

Q3. Does it require water or steam?

No, it uses dry heat with glass beads.

Q4. How long does it take to heat up?

Approximately 60 seconds.

Q5. What type of instruments can be used?

Small metal instruments compatible with dry heat processing.

Q6. Is it portable?

It is compact and designed for countertop placement.

Q7. Does it include glass beads?

Yes, glass beads are included.

Q8. Does it require installation?

No permanent installation is required.

Q9. Is this a medical device for patients?

No, it is a professional equipment unit, not a patient-use device.

Q10. Does it provide health or safety guarantees?

No, it provides technical processing functions only.