3M Protemp™ 4 Temporary Crown Material Kit Professional Dental

The 3M Protemp 4 temporary crown kit is made of bis-acryl resin, which is used to make temporary crowns and bridges. It's made for certified dentists who need consistent handling and a good fit at the edges. The material sets quickly with little heat, which makes the placement process much more comfortable for the patient.

Before placing temporary crowns, dentists typically use precision impression material to capture accurate tooth structure and ensure proper fit during restoration.

This temporary crown kit comes with mixing tips, base paste, and catalyst paste. Upon mixing, it chemically polymerizes fast. This temporary crown resin is stable once it sets, which helps keep the fit needed to preserve prepared teeth. The material can be used for both direct and indirect methods. This temporary crown filler protects the tooth and is safe for use in restorative therapy.

Product Uses

1. Temporary crowns for teeth in the front and back
2. Temporary bridges with more than one unit
3. Temporary covering after preparing the tooth
4. Protection for dental structures that have been prepared
5. Temporary restoration of teeth that have had endodontic treatment
6. Temporary coverage in areas that are important for aesthetics
7. Temporary replacement of restorations that didn't work
8. Short-term stabilization after a catastrophic injury
9. Protection during orthodontic treatment
10. Protection for severely decayed teeth

How to Use

1. Make sure the tooth is clean and dry. Use vaseline to protect your gums.
2. Put the same amount of base and catalyst paste on a mixing pad or into the tip that came with it.
3. For 30 to 45 seconds, mix in a figure-eight motion until the color is even.
4. Choose a crown shape that matches the tooth that has been prepared. Before filling, make changes.
5. Fill the crown form with a mix of materials, making sure there are no air bubbles.
6. With little pressure, put the filled form on the prepared tooth for one to three minutes. Allow to set as per manufacturer guidelines.
7. Take off the crown form and see if it fits. Use the right burs to cut out extra material.
8. Check the occlusal contacts and make adjustments by selectively grinding.
9. Use polishing agents to make the repair shine.

Product Features

1. Bis-acryl resin formulation engineered for temporary restorations
2. Predictable handling with adequate working time
3. Reliable marginal fit for the interim function
4. Low exothermic reaction minimizing pulpal irritation
5. Dimensional stability following polymerization
6. Compatible with direct and indirect fabrication
7. Complete system with base, catalyst, and mixing tips
8. Reduced moisture sensitivity
9. Strong enough for interim mastication forces
10. Esthetic properties for visible areas
11. Minimal odor during mixing

Technical Specification 

Handling Tips

1. Storage: Keep sealed containers at a temperature between 15 and 25 degrees Celsius. Keep away from direct sunlight. Look at the dates of expiration.
2. Inventory: Use a first-in, first-out system. Order the right amount before it runs out.
3. Temperature: It sets faster in warmer rooms, while cooler rooms give you a longer working time.
4. Mixing: Always mix well. Every time you mix, use a new tip.
5. Moisture: Keep the material dry while mixing and putting it down. Make sure the tooth is fully dry.
6. Safety: Put on gloves before touching uncured material.

Packaging Includes

The temporary crown kit comes with base paste, catalyst paste, and mixing tips in separate sealed containers. Packaging that protects against light keeps the material stable. Labels provide information about the expiration date, batch number, directions, and safety. 

Note: Our product is also available for purchase on eBay.

Medical Disclaimer

⚠️ PROFESSIONAL DENTAL PRODUCT

This product is designed for use by trained dental professionals. Not intended for self-diagnosis or self-treatment. Proper professional training required for safe use. Consult dental professionals for guidance.

This material is intended for temporary interim restoration only and does not provide permanent tooth coverage. Definitive restorations must be completed within appropriate clinical timelines. The material may exhibit wear or margin breakdown if used beyond typical interim periods of two to four weeks.

This product is not intended to diagnose, treat, cure, or prevent any dental disease or condition. Not for use in patients with known hypersensitivity to bis-acryl resin components. Practitioners must verify the patient's medical and dental history before application.

Warranty & Support

3M makes Protemp to tight standards, and quality controls check the quality of the materials used. If you have any questions or issues, please call 3M Dental customer service. If the material is broken or defective, call the manufacturer and give them the batch number. You can get a new product if it is broken.

Certification

The FDA has approved 3M for use in dentistry. It meets the standards for CE certification in Europe and ISO 1567. The production satisfies the criteria set by ISO 13485.

FAQs

Q: Who can use this temporary crown kit?

A: Only licensed dentists can use this in clinical dentistry settings.

Q: What does the 3M Protemp kit have?

A: The 3M Protemp set comes with mixing tips, base paste, and catalyst paste.

Q: How long does it take to work?

A: At room temperature, two to three minutes. Working time goes down when the weather gets warmer.

Q: How long will it take to set?

A: Approximately five minutes from the start of mixing.

Q: Is this good for permanent restorations?

A: No. This material is strictly for temporary use. Put in permanent repairs in two to four weeks.

Q: What is the best way to keep this stuff?

A: Store sealed containers in a cool, dry place between 15 and 25 degrees Celsius. Stay out of the sun.

Q: How strong is the compression?

A: About 80 to 100 MPa. It's robust enough to work for a short time, but it's easier to change than permanent materials.

Q: Is it okay to use this where people can see it?

A: Yes. Protemp is see-through and comes in colors that work well for esthetic zones.

Q: Does the temperature change how you handle it?

A: Yes. Working and setting times are shorter in warmer places. Working time is longer in cooler places.

Q: How much heat does it make?

A: Less than 15 degrees Celsius during polymerization, therefore, there is little risk of pulpal irritation.

Conclusion

The 3M Protemp 4 temporary crown kit is a reliable choice for temporary crown and bridge construction. It offers predictable handling, sufficient working time, and durable interim coverage. The system provides everything needed for efficient temporary restorations and helps protect prepared teeth while permanent restorations are completed, when used as per clinical guidelines.